Explaining how to feed milk with a baby bottle! Introducing important points such as how to hold the baby and the angle of the bottle

Giving your baby milk from a bottle may seem easy, but there are some important points to keep in mind. If you feed your baby incorrectly, your baby will not be able to drink milk properly.

If you give milk on your own, your baby may choke or vomit it back up, so make sure you have the correct knowledge beforehand.

In this article, we will explain how to feed milk from a baby bottle.Explanation with points and tipsTo do.

surprisingly importantHow to choose a baby bottleWe will also introduce the following, so please refer to it if you are having trouble choosing a baby bottle or if you are about to start breastfeeding your baby.

Check first! List of items needed to feed your baby milk

timing Necessary goods
when making milk ・Baby bottle (nipple according to age)
・Powdered milk for babies
・Hot water (including boiling water)
When cleaning baby bottles ・Cleaning brush for baby bottles and nipples
・Goods for disinfection

When making milk, prepare a baby bottle with a nipple set appropriate for your baby's developmental status and age, as well as powdered milk. When dissolving powdered milk,It is convenient to have a kettle or pot that can boil water, and a water bottle with a thermal function..

You can clean every corner of the baby bottle using a special cleaning brush. When choosing a cleaning brush, understand the characteristics of the material and choose the one you like.

Also, baby bottlesDisinfect after cleaningI have to. There are a variety of disinfectant goods, including those that can be used in the microwave and those that can be soaked in chemical solutions, so be sure to prepare items that are easy to use.

See detailed information on products for feeding milk with a baby bottle

How to make milk for your baby

powdered milk on a spoon

Follow the steps below to make milk for your baby.

  1. Boil water and keep it above 70℃
  2. Pour the finished amount of powdered or solid milk into the baby bottle.
  3. Mix hot water and milk
  4. Cool to about human skin temperature (around 40℃)
  5. Wipe off water droplets from the baby bottle

When shaking hot water and milk, it will be difficult to mix if you add the specified amount of hot water at once, so add about half of the mixture, mix once, and then add the remaining hot water.

If you shake the bottle too vigorously, the milk will foam and your baby won't be able to drink it smoothly.Mix slowly in a circular motionis the trick.

When cooling milk,We recommend soaking the baby bottle in a mug or bowl filled with water.is. If you don't have a mug or something handy when you're out and about, you can cool the baby bottle by running water from the faucet.

Introducing the steps to feed your baby milk from a bottle with tips

We will introduce the steps and tips for feeding your baby milk from a bottle. The steps are as follows:

  • While supporting the baby's head, hold the baby to the side and place the nipple deeply in the baby's mouth.
  • Change the angle of the bottle to avoid swallowing air when breastfeeding
  • After drinking, hold the baby vertically and burp the baby.
  • Wipe your baby's face with clean gauze or cotton.

Understand the steps and tips well,Allows babies to drink milk from a bottle without discomfortLet's support you.

While supporting the baby's head, hold the baby to the side and place the nipple deeply in the baby's mouth.

When feeding your baby with a bottle, hold him on his side instead of lying down. Support your baby's head to prevent it from dropping or twisting.posture with upper body raisedLet's keep it.

Breastfeeding can be made easier by using a nursing cushion. As soon as your baby opens his mouth wide, place the nipple of the bottle on your baby's tongue and push it as far in as possible.

If the nipple is not gripped too shallowly, the baby will not be able to suck the milk properly.Baby's lips tightly cover the nippleThis is proof that the nipple is deeply held in his mouth. Give milk while observing your baby.

Change the angle of the bottle to avoid swallowing air when breastfeeding

Change the angle of the bottle while feeding to prevent your baby from swallowing air.

As the baby continues to drink milk and the amount of milk decreases, if the angle of the bottle is not high enough, air will enter the nipple.

If air gets into the nipple, your baby may inhale the air along with the milk, which can cause regurgitation. Don't swallow the airAs a guide to the angle of the baby bottle, check to see if the nipple is filled with milk.Let's check it out.

Adjust the angle of the baby's upper body and the bottle,Baby bottle standing uprightMaintain a position where you can drink milk comfortably.

After drinking, hold the baby vertically and burp the baby.

Burp your baby after he finishes drinking milk from the bottle.

Hold your baby vertically and place the baby's face and chin on your shoulder. With your free arm,Rub or pat your baby's backPlease let me burp.

You may also belch and vomit at the same time. Placing gauze on your shoulder will help you deal with the problem without panic.

If your baby doesn't like to be held vertically or won't burp, you can sit them on your lap and burp them.

After sitting the baby on your lapUpper body slightly bent forwardPlease support your chest so that Just like when holding your baby vertically, encourage him to burp by rubbing or patting his back.

Wipe your baby's face with clean gauze or cotton.

After burping, wipe your baby's face with clean, damp gauze or cotton wool.Milk and baby saliva around the face and mouthPlease wipe it clean.

After cleaning your face, apply a moisturizer such as baby lotion or cream to prevent your skin from drying out.

If you use a set of moisturizers at the time of breastfeeding,You can take care of your skin frequently and prevent dryness..

When feeding milk with a bottle, it is a good idea to pack a change of clothes for regurgitation, gauze, wet gauze to wipe the face, moisturizer, etc.

Points to note before and after giving milk to a baby from a bottle

There are three points to keep in mind before and after giving your baby milk from a bottle.

  • Disinfect and clean items that may come into contact with your baby's mouth.
  • If you don't burp or vomit after drinking, stay calm.
  • Always dispose of leftover milk

I will explain each.

Disinfect and clean items that may come into contact with your baby's mouth.

Always wash your hands before making milk. Also, be sure to clean and sterilize baby bottles.

There are times when babies want to put everything in their mouths. Even if you don't get it in your mouth when you use it normally, you may end up licking it or putting it in your mouth.

Not only the nipple part that the baby can hold in his/her mouth, but also the things used for the baby such as the nursing bottle.Widespread disinfectionLet's do.

Also, store sterilized baby bottles in a box with a lid or cover them with a cloth until the next feeding time.keep it cleanIt is also important.

If you don't burp or vomit after drinking, stay calm.

Don't worry if you don't burp after drinking milk. This is because the air that was supposed to come out as a belch may be expelled as a fart.

If you can't burp,Lay the child on his side or raise his upper body slightly using a cushion, etc.This will reduce the risk of choking due to regurgitation.

A baby's stomach is long and has a shape that makes it easy to vomit, and the muscles are underdeveloped.Regurgitation is not uncommon.

If regurgitation occurs, remain calm and observe your baby. If your baby seems to be in pain, has a bloated stomach, or has any other symptoms you are concerned about, visit your pediatrician.

Always dispose of leftover milk

Be sure to dispose of any milk left by your baby.Make the milk again for the next feeding.let's

Your baby may not drink all the milk in the bottle every time. Sometimes I fall asleep in the middle.

You may think it would be a waste to throw away the leftover milk you made, butBacteria can grow in milk that has been at room temperature for more than 2 hours.It may be dangerous for your baby to drink it again.

Bacteria also like the temperature of milk that is given to babies at a temperature similar to that of human skin.

Even if your baby has never touched the milk, if it has been at room temperature for more than 2 hours, throw it away for hygiene reasons.

Be sure to clean and sterilize used baby bottles.

Please refer to the steps below for cleaning and sterilizing baby bottles.

  1. Disassemble the baby bottle and wash it with water
  2. Wash carefully with a special brush and detergent
  3. Disinfect (pots/medicines)

The key point of cleaning is``Remove the detergent completely'' and ``Clean the nipple holes as well.''is. You can remove dirt by rubbing the nipple holes.

Disinfecting baby bottlesUntil around 3 months old when the baby's immune system is lowis the standard. However, if your baby is low birth weight or is undergoing medical treatment, please consult a specialist.

To sterilize by boiling in a pot, fill the pot with enough water to submerge the parts of the baby bottle, boil for about 5 minutes, and then use tongs or chopsticks to place it on a clean towel to dry.

Containers that can be sterilized in the microwave and chemicals that can be soaked are also available on the market. in a way that is easy for usCleaning/disinfectionlet's do it.

Is liquid milk better? Introducing common features and differences in how to drink it

liquid milk and powdered milkthe same nutritional contentis. Liquid milk and powdered milk are called breast milk substitutes and are designed to meet the nutritional requirements of your baby.

Unlike powdered milk, liquid milk does not require formula or temperature control. If it is not so cold that the baby dislikes it, there is no need to heat it up to 40℃ and it can be given at room temperature.

Easy to drink, useful when going out or in a disasterHowever, be aware that it has a shorter shelf life than powdered milk.

There are a variety of liquid milk products, such as ones that can be transferred to a baby bottle or an attachment that can be attached to a liquid milk container and fed directly. Choose based on ease of use and your baby's preferences.

reference:Consumer Affairs Agency “What is liquid milk for infants?”

Frequently asked questions about how to feed milk with a bottle

We have compiled a list of frequently asked questions about feeding milk from a baby bottle.

  • How can I check if the milk temperature is about human skin temperature (approximately 40℃)?
  • How much does the pace of breastfeeding differ depending on age?
  • If I want more after drinking the prescribed amount, can I add more milk?
  • Can I carry pre-prepared milk with me when I go out?

Useful questions in practicePlease use this as a reference.

How can I check if the milk temperature is about human skin temperature (approximately 40℃)?

Test the temperature of the milk by placing a few drops on your wrist. When pouring milk onto your wrist, be careful not to let the nipple touch your wrist.

If you feel heat on your wrist, the temperature may be higher than 40 degrees.So let it cool down a bit. 40℃ is just a guideline. There is no need to precisely measure the temperature using a thermometer.

How much does the pace of breastfeeding differ depending on age?

The pace of milk feeding isUntil about 1 month after birth, 1ml to 80ml at a time, about 120 to 1 times a day..Around 3 to 4 months old: 1ml to 160ml at a time, about 200 to 1 times a day.It will be.

As the baby gets older, the amount of milk per feeding increases and the number of times the baby drinks in a day decreases. However, the pace of breastfeeding varies greatly from person to person, so if you are concerned, please consult a public health nurse.

If I want more after drinking the prescribed amount, can I add more milk?

The milk isBasically, it is not recommended to increase the amount more than the specified amount.. If you feel that the prescribed amount is not enough, such as because your baby is larger than the average age, only increase the amount a little.

If you increase the amount more than the prescribed amount, adjust the timing of other feedings to avoid increasing the amount too much from the prescribed daily amount.

Can I carry pre-prepared milk with me when I go out?

Avoid taking home-prepared milk with you when you go out.Carrying prepared milk around can lead to unsanitary conditions..

Bring sterilized baby bottles, milk, and hot water when you go out.Prepared milk just before feedingplease. Nursing spaces such as shopping malls may have hot water available.

It would be a good idea to find out in advance whether there is a place where you can feed your baby milk and whether you can use hot water. If you feel burdened to make milk on the go, you can also use liquid milk.

It's convenient to be particular about the baby bottle you use! Introducing points to consider when choosing

Many people wonder what to choose when purchasing a baby bottle. All baby bottles look similar, butFeatures vary depending on manufacturer and product.

Let's take a look at the following three points when choosing a baby bottle.

  • The shape of the nipple and the sucking hole make it easy for babies to drink.
  • The body shape makes it easy to mix milk and wash the bottle.
  • Made of durable heat-resistant material and easy to clean

I will explain them in order.

The shape of the nipple and the sucking hole make it easy for babies to drink.

Choose a baby bottle that makes it easy for your baby to drink.

Depending on the manufacturer and productThe feel and shape of the nipplesWe pay special attention to the ingredients and make sure that the product is comfortable to drink and that you can drink it naturally, just like drinking breast milk.

The shape of the suction hole isRound holes (O-shaped) when the baby's sucking power is weak, three-cuts (Y-shaped) when the baby's sucking strength is strong, and cross-cuts (X-shaped) when the baby can suck strongly.Size: XNUMX mL

If you choose a bottle that suits your baby's development and preferences, you will have a relaxing breastfeeding time.

The body shape makes it easy to mix milk and wash the bottle.

It is also important that the baby bottle has a shape that is easy for the person feeding the baby to use.

For example,Baby bottle with wide container openingIt has the advantage of being easy to pour milk and hot water into it without spilling it, and making it easier for the milk and hot water to mix. The shape allows you to reach the bottom of the baby bottle, making it easy to clean.

Baby bottles are used multiple times a day. You may be in a hurry to make milk while your baby is hungry and crying.

A baby bottle that allows moms and dads to make milk without stressPlease choose.

Made of durable heat-resistant material and easy to clean

Baby bottles are mainly made of plastic and glass, both of which are durable and resistant to heat.

Plastic ones are lightweight and easy to carry, making them ideal for going out, while glass ones, which are scratch-resistant and hygienic, are ideal for use at home.

If you are looking for a baby bottle that is easy to feed milk to, check out the Richel Hanaemi series.

For those who are looking for a baby bottle that is easy to feed milk,Richel Hanaemi series is recommendedis. The Hanaemi series has the following six features.

  1. Mouthpiece that allows babies to gulp
  2. Wide mouth type for easy pouring of milk
  3. Conical shape makes it easy to shake and mix milk and wash the bottom.
  4. Nipples that can be selected according to growth
  5. Can step up to straw mug
  6. Can be sterilized by boiling or chemical solution

The Hanaemi series baby bottles are designed to be easy to drink.

It has a bubble-like texture that stimulates the mouth, a nipple that is easy to suck on, and a uniquely designed mouthpiece that prevents crushing.Full of special features that babies can drink in large quantities.

We will introduce the two types of baby bottles in the Hanaemi series in detail.

  • Easy and convenient to use at home! Hanaemi glass baby bottle
  • Light and durable for going out! Hanaemi PPSU baby bottle

Easy and convenient to use at home! Hanaemi glass baby bottle

Hanaemi glass baby bottle
Hanaemi glass baby bottle 160mL Hanaemi glass baby bottle 240mL
Amount (tax included) 2,090 Yen 2,200 Yen
Maximum scale capacity 160mL 240mL
Target age From around 0 months From around 3 months
Size φ6.6×13.9H(cm) φ7×16.5H(cm)
Boiling/chemical solution
Details Go to official shop Go to official shop

Hanaemi glass baby bottles are available in two sizes: 0mL, which can be used from around 160 months, and 3mL, which can be used from around 240 months.

The key point is that the bottle is more transparent than PPSU baby bottles, making it easier to remove dirt and odors.

Newborns who don't go out often or babies around 1 year old who have a weak immune systemWe recommend Hanaemi glass baby bottles, which are hygienic.

Hanaemi glass baby bottleClick here for details

reference:Natural Immunology Applied Technology Research Institute Co., Ltd. “What is a baby's immune system like? Introducing ways to protect your baby from infections!”

Light and durable for going out! Hanaemi PPSU baby bottle

Hanaemi PPSU baby bottle
Hanaemi PPSU baby bottle 160mL Hanaemi PPSU baby bottle 240mL
Amount (tax included) 2,200 Yen 2,310 Yen
Maximum scale capacity 160mL 240mL
Target age From around 0 months From around 3 months
Size φ6.6×13H(cm) φ6.8×15.2H(cm)
Boiling/chemical solution
Details Go to official shop Go to official shop

Hanaemi PPSU baby bottles are also available in two sizes: 160mL and 240mL. It's made of plastic, which is convenient for going out, and it's lighter and less likely to break than glass, so you can safely use it on the go.

If you replace the part that you put in your mouth as a straw mug, you can use it as you age.Those who want to use it safely for a long timeWe recommend PPSU baby bottles.

Click here for details on Hanaemi PPSU baby bottle

Experiences of families who actually used the Richel Hanaemi series

Experiences from people who actually used the Richel Hanami seriesI'd like to introduce_______

Richel I received the “Hanaemi PPSU baby bottle”❁⃘*.゚

Baby bottles don't really fit each other, so I've been trying out different brands...💦

It looks like the baby bottle I received was perfect for my daughter 🍼
She drank the milk easily and didn't choke or vomit it back☺️

The 160ml size has a cute floral design and is convenient for going out.
I would recommend this product to my friends who are planning to give birth!

For the above person, Richel's Hanaemi series isIt was suitable for my baby and took it smoothly.It seems that. This book is very convincing because it is based on the experiences of people who have tried baby bottles from multiple manufacturers.

またHighly rated for designis. The Hanaemi series baby bottles have a pale green floral pattern. In addition to the above, there are many testimonials of people liking the design.

Learn how to feed your baby milk from a bottle and enjoy childcare.

When giving milk to your baby in a bottle, prepare the milk just beforehand, and be careful about the temperature of the milk, the baby's position, and the angle of the bottle. Don't forget to wash your hands and sterilize baby bottles.

How to drink milk comfortablyChoosing a baby bottle is also important..

Richel Hanaemi seriesWith this, you can easily feed milk with a structure that allows your baby to drink a lot. It's easy to prepare and care for, so you can breastfeed without any hassle.

When you are raising a baby, you may spend most of the day breastfeeding. Even if only slightlyStress-free baby bottleUse it to enjoy the time you have with your child.

Hanaemi seriesClick here for details